|
#1
02-19-2007, 09:57 AM
|
|||
|
|||
Power Daisy Chain
I'm taking the plunge and buying some Furman PlugLocks which has prompted a question about power.
Currently I have my power strip daisy chained together. I have an APC uninterrupted and a PL Plus conditioner, both with multiple outlets. Should have set up my power strips so that they are all discretely connected to the PL Plus? Thanks, Ian 
__________________
APC Smart-UPS 1400/PL-PLUS/Aardvark Aardsync II Sony C-800G/Apogee Trak2/Roland V-Session/TD-10 Kurzweil SP88X/Yamaha QY70/Z-Systems Optipatch MIDEX-8/Tascam DM-24/MSR6/Rane HC-6 Dell Dimension 8200/P4 - 2.2 - 2 Gigs Dell Inspiron XPS M1710/Duo Core - 2.16 - 4 Gigs Magma CB4DRQ/Hammerfall 96/52/XP Pro SP2 Cubase SX3/Melodyne/Seagate 73 Gig/10,000 RPM SCSI IBM Deskstar/Tascam DA-P1/Tascam 322 DTR-1/Genelec 1029A/Yorkville YSMp1 Whisper Room/AcoustiLok/Tara Labs
|
|
#2
02-19-2007, 12:47 PM
|
||||
|
||||
|
Set up with a hub and spoke, each secondary power strip has its own plug on the master power strip. It makes hunting for ground issues or bad power strips easier.
__________________
Stony View Sound
|
|
#4
02-26-2007, 01:31 AM
|
|||
|
|||
|
Thanks Guys,
I've started working on it and I found a path. I'm plugging all the essential computer stuff into the UPS and I've divided the other items up on the PL-Plus. This allows me to save my files if the power goes out and like you said, keeps things separated in the event of ground hums etc. Ian
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
Linear Mode
|
|
All times are GMT -5. The time now is 11:34 PM.