how to use smaartlive to calibrate speakers

[the windtalker]

hi ,
i want to know how smaartlive is used to calculate ,
also during the calculation , pls let me know when we see spectograph , the reference signal she be flat or it can have varients in up & down the scale.
regards
The windtalker

[guanche]

The reference signal should be pink noise, which is generated by the program itself. You should use a flat response mike and grafic eq and set it so that the response you see on screen is as flat as possible. This way you have a good base that will give you more freedom to play around with the console and FX's.

[TimmyP1955]

Go here:

http://www.prosoundweb.com/live/articles/dougf/smaartbegin.shtml

http://www.prosoundweb.com/live/labbest/smaart/smaart.shtml

http://www.prosoundweb.com/install/tech_corner/ty2/time.shtml

http://www.prosoundweb.com/chat_psw/transcripts/anderson.shtml

[guanche]

Interesting...!!