PDA

View Full Version : drivers for lexicon omega/advice


tbel
11-13-2005, 12:58 PM
Hi,
My son is using a lexicon omega, having trouble with getting low or no sound, hiss & hum. No fun. So, I was wondering if any 3rd party places have asio drivers that'd work better than lexicon? Any other troubleshooting advice?
Thanks,
tom:)

jmail
11-14-2005, 04:22 PM
http://www.lexiconpro.com/Omega/faq.asp
http://www.lexiconpro.com/Omega/help.asp
are a couple of links off the
http://www.lexiconpro.com/Omega/index.asp

It's a USB 1.1 interface, so you're not going to get a whole lot of thru-put, but you should be getting fine volume for recording, if you've got it all setup correctly. How you do that depends on what you're doing. As for the ASIO drivers, you are better off with the supplied ASIO drivers. Check on their web site for any possible updates...

Post back with your computer specs and how and what you're recording and someone might be able to spot any system problem you might have...

tbel
11-14-2005, 06:41 PM
Thanks, that pretty much answers my question, will have da kid post here after perusing the links:)