Exporting Reason

[aportman]

I was wondering if there is a way that a Reason track or song can be exported to an mono file instead of a stereo file. I am wanting to export mono tracks and drag into cubase tracks for editing. I haven't found a way to export this way. If it is possibe and you know a way, please let me know. Thanks!!!

[arela]

You can/(must?) record to cubase, eg each instrument on its own track. If you want mono, fix routing in reason to play it as you want it.

[aportman]

Is it possible to route the midi reaon files (audio part) directly into a Cubsae audio track during real time? In otherwords, when using Rewire, can the tracks be recorded directely from a Reason track, directly going to a selected Cubase audio track? I am trying to seperate the audio tracks for editing in Cubase. At the moment, I am having to export each instrument, which becomes a stereo track, drag it into its own audio track in Cubase. This is very time consumming. Most of the tracks that I am need, need only to be in mono format. Hopefully, this is not too confusing. Thanks for your assistance!!!

[arela]

Is it possible to route the midi reaon files (audio part) directly into a Cubsae audio track during real time? YES
First you have to set up your soundcard with multiple asio inputs (say 1-8)
Same thing in Cubase, Device\vst connection\ add buses - eg 8 stereo IN and 8 stereo OUT.
Then set rewire channels (cubase): Device\Reason - lets say you enable 5 stereo rewire channels.
(mix L and R are output channel 1 and 2)

Now you make a Reason project with:
(eg i use 1 mixer witch is connected to rewire channal 1 and 2 for drums and perc - Reason mixer 2, for bass(es) connected to rewire channel 3/4 (Reason: hardware interface 3/4)
....other instuments for rewire channel 5/6, 7/8 and 9/10

Playback your Reason song, and you see the vu's move for rewirechannels used,
and these can be recorded "live" into Cubase, in this case drums in IN 1 and bass IN 2 and so on.

By using a Reason mixer for every "group", it's easy to mute single instruments and this way record all instruments in 2-3 turns if you want individual wavetracks

Good luck
and it would be better for me to explain this in norwegian, but probably not for you :D

(as to mono / stereo - you can record subgroups like 2-3 subtracktors and malstroms together in 1 stereo track
......
or direct a monosignal to rewire channel 3 - witch is Cubase IN 2 Left

But panning is so easy (and easy to overdo) in Reason, so i find it best to use stereofiles for everything.

These things is somewhat a hardware thing. use of harddisk, cpu etc

[aportman]

Cool!!! I will try this and see if I can get it working. I believe I understand exactly what you are saying on routing the channels. I have been swampted at work the last couple of days, and just now have I had the time to chec k my emails. I will keep you posted on how things go. Again, Thanks for the guidance...!

:)